Table of Contents
nmcli - NetworkManager
nmcli manages NetworkManager in Linux. Work with two core concepts: Device (physical hardware like eth0 or wlan0) and Connection (a saved configuration profile).
Alternatively you could use nmtui application with simple console UI (NetworkManager Textual User Interface).
Overview & Diagnostics
* View overall network status:
$ nmcli general status
* List physical network interfaces and their status:
$ nmcli device status --------------------- DEVICE TYPE STATE CONNECTION enp2s0 ethernet connected Wired connection 1 lo loopback connected (externally) lo virbr0 bridge connected (externally) virbr0
* Show detailed interface info (IP, MAC, DNS, Gateway):
$ nmcli device show enp2s0 -------------------------- GENERAL.DEVICE: enp2s0 GENERAL.TYPE: ethernet GENERAL.HWADDR: 50:E5:49:ED:A9:BF GENERAL.MTU: 1500 GENERAL.STATE: 100 (connected) GENERAL.CONNECTION: Wired connection 1 GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/2 WIRED-PROPERTIES.CARRIER: on IP4.ADDRESS[1]: 192.168.178.18/24 IP4.GATEWAY: 192.168.178.1 IP4.ROUTE[1]: dst = 192.168.178.0/24, nh = 0.0.0.0, mt = 100 IP4.ROUTE[2]: dst = 0.0.0.0/0, nh = 192.168.178.1, mt = 100 IP4.DNS[1]: 192.168.178.1 IP4.DOMAIN[1]: lan IP6.ADDRESS[1]: 2001:1c00:2e07:fa0a:c363:14e8:16bd:6436/64 IP6.ADDRESS[2]: fdaa:66:67:a:4b23:15d3:3424:d1ab/64 IP6.ADDRESS[3]: fdaa:66:67:a::e78/128 IP6.ADDRESS[4]: 2001:1c00:2e07:fa0a::e78/128 IP6.ADDRESS[5]: 2001:1c00:2e07:fa0a:52e5:49ff:feed:a9bf/64 IP6.ADDRESS[6]: fdaa:66:67:a:52e5:49ff:feed:a9bf/64 IP6.ADDRESS[7]: fe80::52e5:49ff:feed:a9bf/64 IP6.GATEWAY: fe80::ee08:6bff:fe84:2043 IP6.ROUTE[1]: dst = fe80::/64, nh = ::, mt = 1024 IP6.ROUTE[2]: dst = fdaa:66:67:a::/64, nh = ::, mt = 100 IP6.ROUTE[3]: dst = 2001:1c00:2e07:fa0a::/64, nh = ::, mt = 100 IP6.ROUTE[4]: dst = ::/0, nh = fe80::ee08:6bff:fe84:2043, mt = 100 IP6.ROUTE[5]: dst = fdaa:66:67:a::e78/128, nh = ::, mt = 100 IP6.ROUTE[6]: dst = 2001:1c00:2e07:fa0a::e78/128, nh = ::, mt = 100 IP6.DNS[1]: fdaa:66:67:a::1
* List all saved connection profiles:
$ nmcli connection show
* Show only active connections:
$ nmcli connection show --active -------------------------------- NAME UUID TYPE DEVICE Wired connection 1 483fb914-06e5-4b66-b00f-e2b31025eaff ethernet enp2s0 lo ce29234b-7809-4b88-b743-79bf79ac55bf loopback lo virbr0 4778a23b-a938-412c-8c64-e78ecb98571c bridge virbr0
Wi-Fi Management
* Scan for nearby Wi-Fi networks:
$ nmcli device wifi list
* Connect to a Wi-Fi network:
# nmcli device wifi connect "SSID_NAME" password "WIFI_PASSWORD"
* Prompt securely for Wi-Fi password (prevents saving password in shell history):
# nmcli --ask device wifi connect "SSID_NAME"
* Toggle Wi-Fi on or off:
$ nmcli radio wifi off $ nmcli radio wifi on
Connection Controls (Up / Down / Delete)
* Activate a connection profile:
# nmcli connection up "MyConnection"
* Deactivate a connection profile:
# nmcli connection down "MyConnection"
* Disconnect a hardware device directly:
# nmcli device disconnect eth0
* Delete a saved connection profile:
sudo nmcli connection delete "MyConnection"
Network Configuration (IP, Gateway, DNS)
* Set a static IPv4 address and gateway:
# nmcli connection modify "Wired connection 1" ipv4.addresses 192.168.1.50/24 ipv4.gateway 192.168.1.1 ipv4.method manual # nmcli connection up "Wired connection 1"
* Switch back to dynamic IP (DHCP):
# nmcli connection modify "Wired connection 1" ipv4.method auto # nmcli connection up "Wired connection 1"
* Set custom DNS servers:
# nmcli connection modify "Wired connection 1" ipv4.dns "1.1.1.1 8.8.8.8" # nmcli connection up "Wired connection 1"
Adding New Profiles
* Add a standard Ethernet connection profile (DHCP):
# nmcli connection add type ethernet con-name "Office-Eth" ifname eth0
* Add a static Ethernet connection profile directly:
# nmcli connection add type ethernet con-name "Static-Eth" ifname eth0 ip4 10.0.0.10/24 gw4 10.0.0.1
NetworkManager Configuration
Locations
NetworkManager configuration files and connection profiles are stored across a few specific directories on your system.
| Location | Description |
|---|---|
| /etc/NetworkManager/system-connections/ | Saved Connection Profile.Contains all individual network profiles (Wi-Fi access points, static IP settings, VPNs, Ethernet configurations). Each file is stored in Keyfile format and contains sensitive credentials like Wi-Fi passwords. |
| /etc/NetworkManager/NetworkManager.conf /etc/NetworkManager/conf.d/ | Global Configuration & Custom Drops. NetworkManager.conf is the primary system configuration file. Any custom overrides or plugin configurations belong in /etc/NetworkManager/conf.d/. |
| /run/NetworkManager/ /var/lib/NetworkManager/ | DNS& Runtime Network State (Auto-generated).Contains internal DHCP leases, runtime connection states, and auto-generated DNS configurations. These do not need to be backed up. |
Backup/Restore Configuration
When testing network changes such as bridges, VLANs, or bonds with nmcli, back up the NetworkManager connection profiles first. Also capture the current runtime state as a readable reference.
Back up NetworkManager
Because /etc/NetworkManager/system-connections/ stores Wi-Fi passwords, you must use sudo to read and archive the files. Create a compressed tarball archive of all configurations.
# tar -czvf /tmp/nm-config-backup-$(date +%F).tar.gz /etc/NetworkManager/
After restoring reload NetworkManager to apply changes:
# nmcli connection reload # systemctl restart NetworkManager
Save a readable snapshot of the current state
These files are not used for automatic restoration, but they are useful for comparing the working setup with the changed configuration:
mkdir -p "$HOME/network-state-before-change" nmcli connection show \ > "$HOME/network-state-before-change/nm-connections.txt" nmcli device show \ > "$HOME/network-state-before-change/nm-devices.txt" ip address show \ > "$HOME/network-state-before-change/ip-address.txt" ip route show table all \ > "$HOME/network-state-before-change/ip-routes.txt" ip rule show \ > "$HOME/network-state-before-change/ip-rules.txt"
For more detail, export every NetworkManager profile in a human-readable form:
while IFS= read -r uuid; do nmcli --show-secrets connection show uuid "$uuid" printf '\n%s\n\n' '----------------------------------------' done < <(nmcli -g UUID connection show) \ > "$HOME/network-state-before-change/nm-connections-full.txt" chmod 600 "$HOME/network-state-before-change/nm-connections-full.txt"
Because --show-secrets may reveal credentials, protect this file carefully. Omit --show-secrets if the secrets are not needed in the reference copy.