====== Tips for EQ ======
Room EQ is not an exact science, so be prepared to experiment with different configuration. Let your own ears and preferences convince you! Here is a small collection of best practices that I could find or discovered myself.
    
===== Room EQ Wizard =====
When doing measurements and generating EQ in REW, the follow best practices apply:


===== Rephase =====

When doing EQ in rePhase try to follow these simple guidelines:

  * void high Q corrections as much as you can.
  * Remember that dips are not as hearable as rises, so flatten the rise points but avoid to flatten dips unless they are deeper than app -8dB.
  * Avoid high gains as much as you can. Don't go over +18dB, even better if you can stay bellow +12dB.
  * There is an initial 6dB attenuation in BruteFIR. If your max filter is (for example) set to +16dB then set additional 10dB of attenuation in BruteFIR settings to avoid clipping.
  * Measure carefully! your correction will only be good as was your measurement. Repat measurements unless you have good correlation between MMM (RTA) and sweep measurements (make at least 5 of them and average them).
  * For best results with Volumio and BruteFIR I recommend sampling rate of 96000 and 65536 filtersize/taps.


===== Volumio =====

===== Links =====
  * [[https://volumio.github.io/docs/Plugins_User_Manuals/brutefir/Making_filters.html|Volumio Making Filters]]
  * [[https://www.minidsp.com/applications/acoustic-measurements/umik-1-setup-with-rew|Umik setup with REW]]