HomeWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Flash Non-FOTA Firmwares ======
This only applies to NON-FOTA firmware versions. In order to flash ESP8266 the GPIO0 should be connected to GND. This is D3 on Wemos D1 Mini Pro.

----
===== ESP-OPEN-SDK Firmwares =====

==== First initial flash ====
<code>
# Full erase first
esptool.py --port /dev/ttyUSB0 --baud 115200 erase_flash

# Flash esp-open-sdk/sdk/bin/esp_init_data_default.bin at 0x3fc000
esptool.py --port /dev/ttyUSB0 --baud 115200 write_flash 
               --flash_mode dio --flash_size 32m 
               0x00000 firmware/0x00000.bin 
               0x10000 firmware/0x10000.bin 
               0x3fc000 /home/oscar/esp8266/esp-open-sdk/sdk/bin/esp_init_data_default.bin
</code>         
==== Subsequential flash ====
<code>
esptool.py --port /dev/ttyUSB0 --baud 115200 write_flash 
		--flash_mode qio --flash_size 32m 
                0x00000 firmware/0x00000.bin 
                0x10000 firmware/0x10000.bin
</code>
===== EASY ESP Firmware =====
<code>
sudo python esptool/esptool.py erase_flash
sudo python esptool/esptool.py -p /dev/ttyUSB0 -b 460800 write_flash -fm qio 0x00000 0x00000.bin 
</code>
===== NODEMCU Firmware =====
Finally got the Wemos D1 mini pro with 16 MByte flash.
<code>
esptool.py erase_flash
esptool.py -b 460800 write_flash -fm qio 0x00000 bin/0x00000.bin 0x10000 bin/0x10000.bin
</code>
And finally it was resolved with dev version of NodeMcu prepared in https://nodemcu-build.com/

My best result is 17 modules in the BIN. Many was unsuccessful
I reported result in GitHub (with modules) - https://github.com/nodemcu/nodemcu-firmware/pull/1529

Also their own fixed esptool used - https://github.com/nodemcu/nodemcu-firmware/tree/dev/tools

===== LINKS ======
  * https://github.com/nodemcu/nodemcu-firmware/tree/dev
  * http://nodemcu.readthedocs.io/en/dev/en/
  * https://github.com/nodemcu/nodemcu-firmware/pull/1529
  * https://nodemcu-build.com/stats.php
  * http://tiestvangool.ghost.io/2016/08/13/flash-nodemcu-esp8266/
  * http://www.letscontrolit.com/wiki/index.php/ESPEasy#Stable