Differences

This shows you the differences between two versions of the page.

--- linux:powersave:powertop [2021/04/13 16:51] – [1. Automatic] oscar
+++ linux:powersave:powertop [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Powertop ======
-===== Measure =====
-PowerTop has two methods to investigate power consumption impovement options:
-To find out which ones are suggested, proceed as follows:
-	# powertop
-	# powertop --html=powerreport.html
-With the normal powertop command you can see the tuning options in the "Tuning" tab. By pressing enter you can tune on or off an option. The used command line command is shown in the header of the screen.
-Using the html option provides a more easy way to see all the tuning commands. In the "Tuning" tab of the report all parameters and commands are shown. If you experience inaccurate measurement, then it is likely that you need to calibrate powertop first. Calibration to prevent inaccurate measurement can be done by:
-	# powertop --calibrate
-Note: Calibration will toggle various functions like backlight or wifi. Thus, it may turn your screen black for some time, lose your connection, and so on. Do not touch the machine during the calibration.
-===== Tune =====
-==== 1. Automatic ====
-This can be done by having "powertop --auto-tune" be started as a service.
-<code>
-# nano /etc/systemd/system/powertop.service
-  [Unit]
-  Description=Powertop tunings
-  [Service]
-  ExecStart=/usr/bin/powertop --auto-tune
-  RemainAfterExit=true
-  [Install]
-  WantedBy=multi-user.target
-</code>
-Install and enable the service unit:
-<code>
-# systemctl daemon-reload
-# systemctl enable powertop.service
-# systemctl start powertop.service
-</code>
-==== 2. Customized ====
-These can be done by creating a script with optimization commands that is started by a service.
-The script will look like:
-<code>
-# cat /usr/local/bin/powersave.sh
-#!/bin/sh
-# Is invoked by systemd powersave.service
-# Need a delay because of race condition with framebuffer init (/sys/class/graphics/fbcon/cursor_blink)
-/bin/sleep 5
-echo min_power > /sys/class/scsi_host/host0/link_power_management_policy
-echo min_power > /sys/class/scsi_host/host5/link_power_management_policy
-echo min_power > /sys/class/scsi_host/host3/link_power_management_policy
-echo min_power > /sys/class/scsi_host/host1/link_power_management_policy
-echo min_power > /sys/class/scsi_host/host4/link_power_management_policy
-echo min_power > /sys/class/scsi_host/host2/link_power_management_policy
-echo 0 > /proc/sys/kernel/nmi_watchdog
-echo 1500 > /proc/sys/vm/dirty_writeback_centisecs
-echo auto > /sys/bus/i2c/devices/i2c-1/device/power/control
-echo auto > /sys/bus/i2c/devices/i2c-2/device/power/control
-echo auto > /sys/bus/i2c/devices/i2c-3/device/power/control
-# USB Mouse
-#echo auto > /sys/bus/usb/devices/1-3/power/control
-echo auto > /sys/bus/pci/devices/0000:00:14.0/power/control
-echo auto > /sys/bus/pci/devices/0000:00:00.0/power/control
-echo auto > /sys/bus/pci/devices/0000:00:02.0/power/control
-echo auto > /sys/bus/pci/devices/0000:00:17.0/power/control
-echo auto > /sys/bus/pci/devices/0000:00:1f.2/power/control
-echo auto > /sys/bus/pci/devices/0000:00:08.0/power/control
-echo auto > /sys/bus/pci/devices/0000:00:16.0/power/control
-echo auto > /sys/bus/pci/devices/0000:00:14.2/power/control
-echo auto > /sys/bus/pci/devices/0000:00:1f.0/power/control
-echo auto > /sys/bus/pci/devices/0000:01:00.0/power/control
-/sbin/ethtool -s enp1s0 wol d
-echo 0 > /sys/class/graphics/fbcon/cursor_blink
-# Enable L1 and L0s on PCIe Intel Bridge and Realtek network adapter
-# Does not seem to differ anything
-setpci -s 00:1c.0 0x50.B=0x43
-setpci -s 01:00.0 0x80.B=0x43
-#SSD Optimization the deadline scheduler ensures bulk transactions won't slow down small transactions
-echo deadline > /sys/block/sda/queue/scheduler
-</code>
-Make the script executable:
-<code>
-# chmod +x /usr/local/bin/powersave.sh
-</code>
-Create the service unit that will look like:
-<code>
-# nano /etc/systemd/system/powersave.service
-  [Unit]
-  Description=Power Saving tunings
-  Requires=getty.target
-  After=getty.target
-  [Service]
-  Type=idle
-  RemainAfterExit=true
-  ExecStart=/usr/local/bin/powersave.sh
-  [Install]
-  WantedBy=multi-user.target
-</code>
-Install and enable the service unit:
-<code>
-# systemctl daemon-reload
-# systemctl enable powersave.service
-# systemctl start powersave.service
-</code>