Differences

This shows you the differences between two versions of the page.

--- domoticz:base-system [2023/10/19 16:43] – [Locale] oscar
+++ domoticz:base-system [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Base Setup ======
-----
-===== OS installation =====
-Download PI OS image and follow the image installation steps.
-===== Enable ssh =====
-In order to be able to remote ssh into the server edit the sshd configuration file. And set the following parameters:
-<code>
-# nano /etc/ssh/sshd_config
----------------------------
-# Authentication:
-LoginGraceTime 2m
-AllowUsers root pi
-PermitRootLogin yes
-StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
----------------------------
-# systemctl restart ssh
-</code>
-===== Networking =====
-<code>
-# nano /etc/network/interfaces
-------------------------------
-auto lo eth0
-iface lo inet loopback
-#iface eth0 inet manual
-iface eth0 inet static
-address 192.168.178.xx
-netmask 255.255.255.0
-network 192.168.178.0
-broadcast 192.168.178.255
-gateway 192.168.178.1
-</code>
-===== Migrate Root Filesystem to F2FS =====
-[[raspberry:raspberry-sd|Raspberry SD card]]
-===== Adjust fstab =====
-<code>
-# nano /etc/fstab
------------------
-proc                  /proc           proc    defaults          0       0
-PARTUUID=5d3fca68-01  /boot/firmware  vfat    defaults          0       2
-PARTUUID=5d3fca68-02  /               f2fs    defaults,noatime,nodiratime  0       1
-tmpfs                 /var/log        tmpfs   defaults,noatime,nosuid,mode=0755,size=80m    0 0
-tmpfs                 /var/tmp        tmpfs   defaults,noatime,nosuid,size=30m    0 0
-</code>
-===== Set the Welcome Text =====
-<code>
-# nano /etc/motd
-----------------
-______                      _   _
-|  _  \                    | | (_)
-| | | |___  _ __ ___   ___ | |_ _  ___ ____
-| | | / _ \| '_ ` _ \ / _ \| __| |/ __|_  /
-| |/ / (_) | | | | | | (_) | |_| | (__ / /
-|___/ \___/|_| |_| |_|\___/ \__|_|\___/___|
-</code>
-===== Locale =====
-For setting up locales see section [[linux:debian:locales|Locale]]. On our Home server the configuration should be as follows:
-<code>
-# locale -a
----------------
-C
-C.utf8
-en_GB.utf8
-en_US.utf8
-nl_NL.utf8
-POSIX
-# cat /etc/default/locale
---------------------------
-#  File generated by update-locale
-LANG=en_US.UTF-8
-LANGUAGE="en_US:en"
-LC_TIME="nl_NL.UTF-8"
-LC_NUMERIC="nl_NL.UTF-8"
-LC_MONETARY="nl_NL.UTF-8"
-LC_PAPER="nl_NL.UTF-8"
-</code>
-===== Power Saving =====
-  * Disable the blinking cursor:[[linux:system:powersave:cursor-blink|Cursor blink off]]
-  * Configure PowerTop: [[linux:system:powersave:powertop|Powertop]]
-  * Tune ASPM: [[linux:system:powersave:aspm|ASPM on Linux]]
-===== Install frequently used packages =====
-  # apt-get install sudo
-  # apt-get install iputils-ping
-  # apt-get install nano
-  # apt-get install less
-===== Container prerequisites =====
-Be aware of the following prerequistes for some containers:
-  * [[https://wiki.oscardegroot.nl/doku.php?id=linux:homeserver:mailserver:rspamd#redis|Mailserver - Redis]]
-  * [[linux:homeserver:fileserver#Host preparations|Prerequisited for Fileserver]]
-  * [[linux:homeserver:webserver#Host preparations|Prerequisited for Webserver]]
-==== lxc-menu ====
-Create the lxc-menu in /usr/local/bin
-  * [[linux:homeserver:lxc-menu|LXC-Menu]]