Differences

This shows you the differences between two versions of the page.

--- android:oneplus:customization [2020/09/16 13:43] – oscar
+++ android:oneplus:customization [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-====== OnePlus 6T Customization ======
-===== Basic requirements =====
-  * Ensure that the device is on the latest Android 10 firmware.
-  * Ensure that the device has at least 60% battery remaining.
-  * First: if you use anything else than a PIN code to unlock your phone, change it now. Last TWRP image for Android 10 asks for a data decryption password. It will be easier if it’s a PIN code. Go to Settings > System > Security and change your screen locking choice by a PIN code.
-  * Make sure your computer has adb and fastboot. Setup instructions can be found here.
-===== Unlock Bootloader =====
-The steps below only need to be run once per device. Unlocking the bootloader will erase all data on your device!
-  - Prepare phone:
-    - Enable Developer options: Settings > System > About. Tap repeatedly on “build number”
-    - Go back to System, then go to developer options.
-    - Enable **USB debugging**
-    - Enable **bootloader OEM unlocking**, if present
-    - Enable **advanced reboot** options.
-  - Connect the device to your PC via USB.
-  - Boot into fastboot mode. Open a terminal window, and type: <code>adb reboot bootloader</code> You can also achieve this via a key combination: With the device powered off, **hold Volume Up + Volume Down + Power**. You can also achieve this on the computer.
-  - Once the device is in fastboot mode, verify your PC finds it by typing:<code>fastboot devices</code> Tip: If you see no permissions fastboot while on Linux or macOS, try running fastboot as root.
-  - Now type the following command to unlock the bootloader:<code>fastboot oem unlock</code>
-  - If the device doesn’t automatically reboot, reboot it. It should now be unlocked.
-  - Since the device resets completely, you will need to re-enable USB debugging to continue.
-  - You can check if the device is actually unlocked by executing: <code>fastboot oem device-info</code>It will tell you something like “device unlocked: true”. Please note it will ask you to erase all of your data, and that you must accept to continue.